Music loyal to its creator

The SS-NA2ES loudspeaker brings forward the natural balance of the dynamism and airiness present in music as its being recorded. From transcendent high frequencies to low notes felt as much as heard, the detail and richness the composer envisioned are delivered without compromise or coloration.
Pinpoint accurate high frequencies

Sony's innovative I-Array™ tweeter system achieves the wide dispersion and ambience of original recordings without adding any unnatural artifacts to the sound. The result is astonishingly smooth highs with increased resolution, a broader soundstage and a delicate but precise sound image.
Inherited strength

Building on the Sony AR Series’ legacy of rock-solid loudspeaker construction, the SS-NA2ES cabinet is made of Scandinavian birch, a wood highly regarded for its acoustic resonance and performance. Within, the woofer is isolated from other drivers by two distinct separation boards to preserve the critical sonic purity of the mid range frequencies. Sony’s expert woodworkers meticulously craft each precise enclosure to a degree of perfection that’s as pleasing to the eye as it is to the ear.
Ready for the theater

The entire Sony ES line of loudspeakers have been matched to work together flawlessly not only to deliver the most lifelike reproduction of music, but also to bring impactful excitement to movie soundtracks.

System	3-way, 6-driver, bass reflex, floorstanding speaker system
Drivers	25 mm soft-dome tweeter Two 19 mm soft-dome tweeters 130 mm paper-cone woofer Two double-drive 165 mm aluminum-cone woofers
Frequency Response	45 Hz to 45 kHz (-10dB)
Crossover Frequency	400 Hz, 4 kHz multi-slope network
Sensitivity	90 dB (2.83 V/m)
Nominal Impedance	4 ohms
Maximum Instantaneous Input Power:	100 watts (non-clipping)
Dimensions (WxHxD)	Including projecting parts 10.0 x 35.4 x 16.3 inches (255 x 900 x 415 mm)
Weight	70.5 lbs. (32 kg)

Footnotes

¹ 4K upscaling requires a 4K projector or 4K TV. ² Requires devices connected to the same wireless home network. ³ Broadband speed of at least 2.5 Mbps recommended (10 Mbps for HD). Content subject to change and may require fees. ⁴ iPod® and iPhone® support is limited to the following players: iPod touch®, iPod classic®, iPod nano® 1st, 2nd & 3rd generation, iPod® 4th & 5th generation & iPod mini and iPhone 3G, 3Gs and 4G models. ⁵ Requires HDMI® cable sold separately. ⁶ Requires HDTV with equivalent display and HDMI® cable sold separately. ⁷ Requires HDMI® cable and LPCM capable receiver. ⁸ Requires HDTV and HDMI® cable sold separately. ⁹ Syncs with BRAVIA® Sync or Theatre Sync™ products. ¹⁰ May require additional accessories. Check with your authorized Control4® dealer for details. ¹¹ Requires capable HDTV / video source and HDMI® cable sold separately. ¹² Requires 3D content, 3D glasses, and HDMI® cable (at least 10.2 Gbps). ¹³ Simulated 3D image will vary based on source content. ¹⁴ Requires an optional license purchase from an authorized Control4® dealer. ¹⁵ Requires home network and one device on network to be set up as a DLNA server. Streaming content, copy-protected content and certain formats are not supported. ¹⁶ Requires active internet connection and devices connected to the same WiFi® network. ¹⁷ Compared to normal viewing. Based on a 55-inch LED TV with Picture Setting Standard. ¹⁸ As of January 1, 2012. ¹⁹ Streaming content, copy-protected content and certain formats are not supported. ²⁰ Largest, highest resolution consumer television, as of August 2012. ²¹ 65 Watts total power (20+20+12.5+12.5). ²² '4K' is a resolution standard commonly used in the digital cinema industry that refers to images with a horizontal resolution of approximately 4,000 pixels. The actual panel resolution of 84" XBR-X900 is 3,840 x 2,160 pixels (in 16:9 aspect ratio). This corresponds to the so‐called "QFHD" (Quad Full High Definition) display standard. In practice, this is equivalent to the widely-accepted definition of "4K" resolution. ²³ 1.5m is recommended viewing distance for 4K (3840 x 2160) content with XBR-84X9000 to enjoy the most immersive experience. ²⁴ Ethernet connection required. Fees may apply for 4K networked video service. ²⁵ PS3 system and SimulView™ glasses sold separately. ²⁶ Actual panel resolution of XBR‐X900A 4K Ultra HD TV is 3,840 x 2,160 pixels (in 16:9 aspect ratio). HDTVs have a panel resolution of 1,920 x 1080 pixels. ²⁷ Simulated 4K image will vary based on source content. ²⁸ Ethernet connection required. Fees may apply for 4K networked video service. ²⁹ Broadband speed of at least 2.5 Mbps recommended (10 Mbps for HD). Content subject to change and may require fees. Wireless connectivity requires 802.11 home network (802.11n recommended). Skype requires CMU-BR100 or CMU-BR200 camera sold sep. Subject to Skype’s terms and conditions. ³⁰ Requires PS3 system, PlayMemories Studio™ software and HDMI® cable (at least 10.2 Gbps) sold separately. ³¹ Requires compatible Near Field Communication (NFC)-enabled Xperia™ smartphone. Certain formats are not supported. The video quality may be degraded due to environmental interference. ³² Requires smartphone with Wi-Fi® certified Miracast™ technology. Certain formats are not supported. The video quality may be degraded due to environmental interference ³³ Actual panel resolution of XBR‐X850A 4K Ultra HD TV is 3,840 x 2,160 pixels (in 16:9 aspect ratio). HDTVs have a panel resolution of 1,920 x 1080 pixels. ³⁴ Requires compatible Near Field Communication (NFC)-enabled Xperia™ smartphone. Certain formats are not supported. The video quality may be degraded due to environmental interference. ³⁵ 40 Watts total power (10+10+10+10)

SS-NA2ES

Designed for the pure pleasure of music

Music loyal to its creator

Pinpoint accurate high frequencies

Inherited strength

Ready for the theater